Cited to the FCC's rule
Alert Encoders Generate Two Tones at Once 🎵
Under the FCC's rule for Emergency Alert System encoders, the encoder must provide an attention signal. In the rule, the audio tones have fundamental frequencies of 853 and 960 Hz; the encoder's timing circuitry generates the two tones simultaneously for 8 seconds.
The cited wording
www.ecfr.gov#:~:text=generates%20the%20two%20tones%20simultaneously%20for%20a%20time%20period%20of%208%20seconds
generates the two tones simultaneously for a time period of 8 seconds
The FCC's rule, 47 CFR 11.32, eCFR :: 47 CFR 11.32 -- EAS Encoder. (accessed Nov. 17, 2026).
Every claim, beside its sentence
| Claim | In the Short | The FCC's rule |
|---|---|---|
| C1 Attention signal | In the ShortThat pair of tones is the attention signal the encoder must provide. | The FCC's ruleThe encoder must provide an attention signal |
| C2 Tone frequencies | In the ShortOne tone is eight hundred fifty-three hertz. The other tone is nine hundred sixty hertz. | The FCC's ruleThe audio tones shall have fundamental frequencies of 853 and 960 Hz |
| C3 Timing circuitry | In the ShortIn that rule, the encoder's timing circuitry generates the two tones simultaneously for a time period of eight seconds. | The FCC's ruleThe encoder shall have timing circuitry |
Transcript
- The attention signal in alert encoders is two tones. C1
- Set out in the FCC's rule for alert encoders, one tone is eight hundred fifty-three hertz. C2
- The other tone is nine hundred sixty hertz. C2
- In that rule, the encoder's timing circuitry generates the two tones simultaneously for a time period of eight seconds. C3
- That pair of tones is the attention signal the encoder must provide. C1
Corrections
No correction is recorded for this page.